IRIG Formats,  IRIG code designations

The name of an IRIG code format consists of a single letter plus 3 subsequent digits. Each letter or digit reflects an attribute of the corresponding IRIG code. The following table contains standard code formats defined in IRIG standard 200-98:

IRIG A	IRIG B	IRIG D	IRIG E	IRIG G	IRIG H
A000	B000	D001	E001	G001	H001
A003	B003	D002	E002	G002	H002
A130	B120	D111	E111	G141	H111
A132	B122	D112	E112	G142	H112
A133	B123	D121	E121		H121
		D122	E122		H122

The code format names are composed as described below:

First letter: Rate Designation	A B D E G H	1,000 PPS      ( 1 ms count ) 100 PPS         ( 10 ms count ) 1 PPM             ( 1 minute count ) 10 PPS           ( 0.1 second count ) 10,000 PPS    (  0.1 ms count ) 1 PPS             ( 1 second count )
1st Digit: Form Designation	0 1	DC Level Shift (DCLS), width coded, no carrier Sine wave carrier, amplitude modulated
2nd Digit: Carrier Resolution	0 1 2 3 4	No carrier(DCLS) 100 Hz / 10 millisecond resolution 1 kHz / 1 millisecond resolution 10 kHz / 100 microsecond resolution 100 kHz / 10 microsecond resolution
3rd Digit: Coded Expressions	0 1 2 3	BCD, CF, SBS BCD, CF BCD BCD, SBS

Abbreviations used in the table above:

• BCD - Binary Coded Decimal, coding of time (HH,MM,SS,DDD)
• SBS - Straight Binary Second of day (0....86400)
• CF - Control Functions depending on the user application

Note IRIG-C was replaced by IRIG-H

How to Interfacing with high voltage IRIG signals

IRIG Distribution Products

Copyright 2008 All Rights Reserved