|
|
|
|
| IRGM-8004 |
IRIG Digital
Distribution Amplifier |
|
 |
| For High Quality IRIG Signal
Distribution |
|
|
|
|
The IRGM-8004 is a distribution amplifier (DA) that accepts an electrical unmodulated digital (DCLS) IRIG A
through H input signal and produces four individual electrical output
signals for distribution over four separate coaxial cables to other IRIG
receivers. NASA-36 and IEEE 1344 are also supported. For
optical IRIG distribution amplifier see the
IRGM-7004. Contact us if you need a modulated (analog) IRIG see
the IRGM-2004.
Integral indicators are also provided to continuously
indicate the presence of IRIG signals as well as the presence of operating
power making system troubleshooting simple. Units can be mounted in our 1U,
2U, or 3U rack panels, and may be daisy chained providing multiple outputs ( e.g. 3 units in a 1U rack yields 10 outputs)
|
|
| Specifications |
|
|
Important Features |
| Data Rate |
DC to 20 Mb/s |
|
· 4 Buffered
Outputs |
| Protocols |
IRIG A,B,D,E,H, NASA36 |
|
· Cost effective |
| Input Impedance |
1.5K ohms |
|
· Signal & Power
Indicators |
| Output Impedance |
50 ohms |
|
· Rack or
wall mountable |
| Input / Output Level |
TTL (3.76 volts) |
|
|
| Output Drive Current |
40 mA max per channel |
|
|
| Bit Error Rate |
10E9 minimum |
|
|
| Leading Edge Rise Time |
20 nsec maximum |
|
|
| Number of Outputs |
4 channels |
|
|
| Signal Connectors |
BNC |
|
|
| Propagation Delay |
10 ns typical |
|
|
| Offset between outputs |
< 5 ns |
|
|
| MTBF (Mil-HDBK-217D) |
>100,000 Hours |
|
|
| Operating Temperature |
-35º to +75º
C |
|
|
| Power Requirements |
11-24 VAC/DC @350ma |
|
|
| Operating Temperature |
-35 to +75 degrees C |
|
|
| Physical Size |
5.0” x 3.0 x 1.0"
127mm x 76mm x 25.4mm |
|
|
|
|
|
|
*Note all specifications are subject to change without notice
Copyright 2008
|
Fiber Optic Communications Systems
