Home  
Map  
CAT/R-1001     Composite Audio Transmission    
For Composite Audio Applications  

   < New product >  Photo pending.

 

The Luxlink© CAT/R-1001 system consists of the CAT-1001 transmitter and CAB-1001 receiver. This system will transmit composite audio signals.

Both multimode and single-mode versions are available and installation only requires a simple one-minute calibration adjustment. In addition, integral indicators are provided on both units to continuously indicate the presence of repetitive signals as well as the presence of operating power making system troubleshooting simple.

 
 
Specifications Important Features
System Bandwidth  5 Hz to 1 MHz    · Composite Audio
Input/Output Impedance  6K ohms  • Cost effective
Input Level  3 Volt pp  • Signal & Power Indicators
Output Level  3 Volt pp  • Multimode & Single mode
Signal/Noise Ratio  60 dB minimum         Versions available
Dynamic Range  58 dB minimum  • Single model for stand 
     alone or rack mount
Linearity  3.0% maximum  • Din Rail mount option
Phase Shift  3.0° maximum
System Delay  25ns + 1ns/foot of fiber
Optical Output Power  -16 dBm (multimode),
 -16 dBm (single-mode)		    
Optical Loss Budget  0-13 dB (multimode),
 0-13 dB (single-mode)		    
Signal Connectors  BNC
Power Requirements  11-24 VAC/DC @150mA
Operating Temperature  -35 to +75 degrees C
Physical Size  5.0" x 3.0" x 1.0"
127mm x 76mm x 25.4mm		    

*Note all specifications are subject to change without notice

Copyright 2025

LuxLink

Voice: 1-516-931-2800

Email: Contact Us