DT/DR-7301
High Speed Data
For Point-to-Point High Speed
Data Applications
Luxlink© DT/DR-7301 system consists of the DT-7301 transmitter and
DR-7301 receiver. This system is designed to transmit and receive TTL, ECL,
or PECL signals in a wide range of diverse applications. The unit can easily
be user configured for single-end or differential mode operation. The
DT/DR-7301 will operate continuously at all data rates from 1 Mb to 200
Mb/sec. An additional benefit of this system is that it can perform protocol
conversion.
Specifications Important Features
Data Rate
1 Mb to 200 Mb/s (50Mb/s TTL)
• 1 Mb to 200 Mb/s
Data Rate
Protocols Supported
TTL (50 ohm/Hi-Z), ECL,
• TTL, ECL, PECL
Selectable
Duty Cycle*
50/50 to 80/20
• Fully
Adjustment Free
Operating Modes
Single-ended or differential
• Signal &
Power Indicators
Rise / Fall time (ECL)
0.5ns typical, 2.5ns max
• Stand-alone,
DIN or
Rack
Mountable
Minimum Pulse Width
5.0 ns (ECL)
Jitter
3.0 ns maximum
System delay
35 ns
typical w/1 meter fiber
Bit Error Rate
1 x 10-9 (worse case)
Operating Wavelength
1310 (-3,-7) or 1550nm (-9)
Optical Loss Budget
0-15 dB (multimode),
Optical Connectors
ST (multimode)
Signal Connectors
BNC
Operating Temperature
-35 to +75 degrees C
Operating Humidity
< 95% non-condensing
MTBF (per MIL HBK 217)
>120,000 hours
Power Requirements
11-24 VAC/DC @210mA
Physical Size
5.0" x 3.0" x 1.0"
*The DT/DR-7301 is AC coupled. Copyright 2025
Fiber Optic Communications Systems
