Home  
Map  
DX/DT/DR-7201     Medium Speed RS-422 / TTL Data     DR-7201 Photo
For Point-to-Point Medium Speed Data Applications  

TTL/RS-422 Application   


The Luxlink© system consists of two DX-7201 transceivers or the DT-7201 transmitter and DR-7201 receiver. All units utilize pure digital on-off modulation to transmit high-speed data signals in accordance with standard RS-422 or TTL specifications. No conversion, sampling or other data manipulation is employed.

The DX/DT/DR-7201 is easily user-configured for either of the above protocols by setting an internal DIP switch. Operation otherwise is totally adjustment free. The system may also be used for protocol conversion if desired. Integral indicators are provided on both units to continuous indicate the presence of data signals as well as operating power thereby making system troubleshooting simple.
 
 
Specifications Important Features
Data Rate DC to 50 Mb/s (TTL),
DC-20Mb/s (RS-422)		    · DC to 50 Mb/s Data Rate
Protocols Supported  TTL (50 ohm/Hi-Z), RS-422  • TTL, RS-422 Selectable
Signal Connectors  BNC, Removable Terminal
 Blocks		  • Adjustment Free
Rise / Fall Time  <12 nanoseconds  • Signal & Power Indicators
Propagation delay RS422 22.5ns (-1,-3models),
14.5ns (-7,-9 models)		    • Stand-alone, DIN or Rack
     Mountable (same unit)
Propagation delay TTL 20.5ns (-1,-3 models)
12.5ns (-7,-9 models)		    
Operating Wavelength 850 (-1), 1310 (-3,-7) or
1550 (-9)nm		    
Optical Output Power
(typ)		  -15 dBm (mulitmode)
 -15 dBM (single-mode)		  
Optical Loss Budget  0-10 dB (multimode)
 0-10 db (single-mode)  		  
Optical Connectors ST (multimode)
FCPC (single-mode)		  
Power Requirements  11-24 VAC/DC @150mA  
Humidity <95% non-condensing
MTBF (per MIL HBK 217) >120,000 hours
Operating Temperature -35 to +75 degrees C
Physical Size  5.0" x 3.0" x 1.0"
127mm x 76mm x 25.4mm		    

Note all specifications are subject to change without notice

Copyright 2025

LuxLink

Voice: 1-516-931-2800

Email: Contact Us